WEBAC®240 is an injection gel designed for making new sealing surfaces (curtains) in foundation soil situated in close proximity to the building component or within the building structure.
Areas of application are e. g. the sealing of tunnel, shaft and sewer systems, abutment walls and wing walls in bridge constructions as well as the sealing of partially non-basement buildings.
WEBAC®240 is suitable as a post-construction, rear-side sealing for construction, expansion and sewer joints covered with soil.
WEBAC®240 can also be used within porous structures (e.g. masonry) and for the installation of post-construction water stops.

Areas of application are e. g. the sealing of tunnel, shaft and sewer systems, abutment walls and wing walls in bridge constructions as well as the sealing of partially non-basement buildings.
WEBAC®240 is suitable as a post-construction, rear-side sealing for construction, expansion and sewer joints covered with soil.
WEBAC®240 can also be used within porous structures (e.g. masonry) and for the installation of post-construction water stops.
- 3-comp. polyacrylic gel
- Swells upon contact with water
- Fulfills the requirements of the KTW
recommendations for large- and
small-surface sealings (D1 + D2)
in contact with potable water
(test certificate) - Fulfills the requirements of ground
water hygiene for large- and smallsurface
sealings (D1 + D2) (test certificate) - Suitability test according to the
requirements specified in the gel
injection guideline 804.6102
(former 835.9201) of the DB AG

Technical Information WEBAC®240






print



