Crack Repair
Closing, sealing, limited flexibilitybridging and bridging where
structural strength is required
Waterproofing of structures
Remedial injection systemfor the repair of damp
proof courses (dpc)
Foundation Pit Sealing
Sealing of water bearing cracksand joints in foundation pits of
slot and sheet pile wall design
WEBAC®150 is suitable for the quick closing and temporary sealing of waterbearing cracks, cavities and leaks under hydrostatic pressure.
The material is used in concrete, brick and natural stone building constructions in structural and civil engineering, bridge building, hydraulic engineering, tunnel and shaft constructions.
Due to its 1:1 mixing ratio WEBAC®150 can be applied by 2-comp. pumps. WEBAC®150 is approved by the German Federal Institue for road constructions according to ZTV-ING, part 3, section 5 (RISS) for use in tunnel and bridges.
The material is used in concrete, brick and natural stone building constructions in structural and civil engineering, bridge building, hydraulic engineering, tunnel and shaft constructions.
Due to its 1:1 mixing ratio WEBAC®150 can be applied by 2-comp. pumps. WEBAC®150 is approved by the German Federal Institue for road constructions according to ZTV-ING, part 3, section 5 (RISS) for use in tunnel and bridges.
- 2-comp. injection foam resin based on polyurethane
- Solvent free, CFC free
- Tested and approved according to ZTV-ING (RISS)
- Registered with the BASt-List
- Fulfills the requirements of the KTW-recommendations for large-surface sealants (D1) in contact with potable water (test certificate).
Technical Information WEBAC®150
print
