Range of Application

• Sealing of buildings
• Crack repair
• Stabilization of structures
• Soil solidification
   

Suitable for:

• PU injection foam resins
• PU combi Injection Resin
• PU injection resins
• PU casting foam resin
• Acrylate gels
• Silicate injection solutions
• Epoxy injection resins

Properties

• Compatibility of the packers with injection material
• Good fastening in the building component
• Corrosion resistance
• High pressure resistance
• Shut-off option towards the building structure
• Available with zerk head/button head fitting and high-pressure or low-pressure fitting

WEBAC injection packers: filler necks for the injection of different injection materials

WEBAC injection packers are used for the injection of various injection materials. Injection packers are filler necks which serve as connection between the injection pump and the structural element to be injected. WEBAC offers many different versions of injection packers including borehole packers, surface packers, plastic packers, steel packers, mechanical packers, etc. This ensures that the right packer is available depending on the required pressure, the type of structural element and the characteristics of the injection material. 
 

WEBAC injection packers: different types at a glance

Borehole packers

• WEBAC_® Mechanical Packers Type S
  • Easy to handle
  • Economical use
     
• WEBAC_® Mechanical Packers Type R
  • Variable use
  • Can also be equipped with button head fittings for higher flow rates
     
• WEBAC_® Hammer-in Packers 
  • Easy to handle
  • Not suitable for porous masonry/concrete
     

Surface packers: 

• WEBAC Plastic Packers
  • No drilling required (non-destructive injection)
  • Often used on horizontal surfaces
     

One-day packers: 

• No material reflow from the packer due to nonreturn valve
• Dismantling and closing possible immediately after the injection
• All operations can be carried out in one day