Range of Application

• Crack injection according to EN 1504-5:2013
• Repair of foundations in wind power plants
• Bonding of concrete and screed
• Sealing of cracks in machine foundations

 

 

Properties

• Mixing ratio 3 : 1
• Low viscosity
• Resistance to dynamic stress
• Good edge adhesion
• Good penetration
• Total solid

Application

• Injection by 1C pump

WEBAC_® 4120P: injection resin for repairing foundations in wind power plants

WEBAC_® 4120P belongs to the group of EP injection resins. These resins are used to obtain structural strength in masonry and concrete in case of dynamic stress on structural elements. The high inherent strength and adhesive tensile strength of WEBAC epoxy resins make sure that even the smallest cracks and crack ramifications are permanently bonded. 

EP injection resins from WEBAC are compatible with concrete, steel, masonry mortar, foil and cable sheathing. Our epoxy resins show a very high resistance to acids, lyes and salts detrimental to the building structure.

WEBAC_® 4120P is especially designed for use in case of dynamic stress on structural elements

The low viscosity EP injection resin WEBAC_® 4120P is particularly recommended for repairs in case of dynamic stress on structural elements. For example, the resin is ideal for repairing cracks in foundations of wind power plants. But WEBAC_® 4120P can also be used to seal cracks in other machine foundations.